online cooking practise
online recipe collection

http://www.cookdojo.com

Search for :
in    
    CookDojo.com

Others say...

"O.K. for the price"
Relatively inexpensive. Does o.k. with small bikes. A little bit of a pain to put together.



"Bike Stand Does Double Duty"
The bike stand was purchased to carry bicycles in my pickup. In the past, when I leaned them against the side rails, the paint got nicked. If they were laid down, the gears could get damaged. The trailer hitch set-up didn't appeal to me, so I bought this and built a wooden frame to hold it in place in the bed. The bike stand stays in place with a bag of sand over the base frame and bungee cords to hold the bikes upright on turns. Works great!

When assembling the parts, bolt them all together loosely at first. The "S" shaped arms may need to be swapped end-to-end as the bends aren't quite perfect. When you are satisfied with the result and it is level, then tighten the bolts. It definitely holds the bikes without needing a kickstand. Do note that the front wheel should go into the stand, as the rear wheel gears will hit otherwise.

"bike rack"
For the cost this bike rack is great.I use this rack just to park my bikes in the garage in the summmer.

"bike bed utilized for use in truck bed"
This being less expensive we wre able to utilize for use to transport are bikes in my truck bed. Eventhough this was made for use on ground.



"Inexpensive but works well"
The Rancor two bike stand was easy to assemble and works as advertised. It is stable with two bikes in it. I had no problem fitting the two adult bikes with one in on the front tire and one in on the back tire. It really is worth the 20 some dollars to not have leaning bike all over the garage.

 

Racor PBS-2R Two-Bike Floor Bike Stand

List Price : $41.00
Our Price : from $24.75

Why I buy this one ?
- Floor-rest bike stand
- Stores 2 bikes in same or opposite directions
- Constructed of tubular steel with durable epoxy finish; some assembly required
- Includes 1 rack for 2 bikes; bikes not included
- 30 by 24 by 22 inches; 13 pounds; 1-year warranty


It's better to buy this one too...

Stanley 33-425 Powerlock 25-Foot by 1-Inch Measuring Tape
details..
 

Black and Decker BDSL30 24-Inch 3-in-1 Gecko Grip Level
details..
 

Stanley 62-502 11-Piece FatMax Screwdriver Set
details..
 

DEWALT D5130 Ballistic Nylon Tape Measure Holder
details..
 

Racor PXR-R ro X-Rack Sports Storage Rack
details..
 

Special offer for you..find the cheapest!
acehardwareoutlet offers this stuff with condition New, new for:
Price : $24.75
Usually ships in 1-2 business days
Endless Variety offers this stuff with condition New, new for:
Price : $26.00
Usually ships in 4-5 business days
ApexSuppliers offers this stuff with condition New, new for:
Price : $25.00
Usually ships in 4-5 business days
BIC Superstore offers this stuff with condition New, new for:
Price : $28.17
Usually ships in 1-2 business days
Turtletools offers this stuff with condition New, new for:
Price : $28.21
Usually ships in 3-4 business days
CrazyDavesToolShed offers this stuff with condition New, new for:
Price : $28.45
Usually ships in 1-2 business days
Polsteins Home & Beyond offers this stuff with condition New, new for:
Price : $29.01
Usually ships in 1-2 business days
Ron's Home and Hardware offers this stuff with condition New, new for:
Price : $29.06
Usually ships in 4-5 business days
True Value offers this stuff with condition New, new for:
Price : $29.59
Usually ships in 1-2 business days
Amazon.com offers this stuff with condition New, new for:
Price : $29.93
Usually ships in 24 hours
What our customer's say!

"Very nice bike stand", The bike stand is very sturdy and takes pretty wide mountain bike tires. When ordering the bike stand, I was concerned that it would not be able to take both bikes, but that was not a problem at all. The stand is big enough to easily take two bikes. Also, it only took about 10 minutes to put together and it is pretty strudy.

"Really poor quality", The bolts don't fit in most holes and nothing lines up as it is supposed to. Far from a time saver the hours spent trying to get this piece of junk to work are better spent finding a product that actually works.

"Employee Bike Storage", I was asked to create a bicycle storage area at my place of employment.
After researching dozens of scenarios and products, I was able to
maximize the space available. I switched and alter direction of the
the stand and now house ten bicycles in the area that only accommodated
4-5. They were shipped promptly and are surprisingly sturdy.

Site Coordinator


"The Almost Perfect Bikestand", I'd call this product almost perfect for two reasons. 1)the put-together was a little bit tricky. Parts didn't exactly match up with other parts, requiring a little more skill and effort than the product description suggested. 2) there could be more space between the two stands. I currently have my mountain bike (with the wide wings on the bars) and my road bike side by side. I guess I could put one in backward to avoid the bar collision problem. Other than that, the stand does make my life easier and my garage neater, and offers a level of protection in that it keeps my bikes from hitting the floor as they occasionally did.

"The best of the floor rack choices", This, after much research, proved to be the sturdiest, widest at the tire insert, and yet cheapest of the 2-bike floor racks.



 
You might need this...

Racor PLB-2R Gravity Freestanding Bike Stand
details..
 

Bicycle Cover, Charcoal
details..
 

Topeak Bike Cover (Mountain Bikes)
details..
 

Racor Ceiling-Mounted Bike Lift #PBH-1R
details..
 

Racor PXR-R ro X-Rack Sports Storage Rack
details..
 
Read this reviews before You buy...

"Poorly tooled", This might be the most poorly tooled piece of junk I have ever purchased. Holes are not properly aligned, bolts are stripped, virtually nothing works as it should. It should be a pretty simple thing to put together, but because parts don't fit or don't work, it is incredibly frustrating. By using parts in ways other than how they were supposed to be used, I was able to get this to work for one bike, but only with a lot of effort and verbal expressions of frustration. Maybe I just got a bad unit, but I will certainly never buy this brand again.

"Quick set-up, works great", This rack was easy to set up (<15 min) and is great for neatly storing bikes in an apartment. It holds our two road bikes, but in opposing directions so as to not have the two handlebars vying for the same space. Highly recommended!

"Awesome Bicycle Racks", If you are looking for a way to organize the bicycles in your home these are the way to go. These racks are very solid and hold the bicycles securely without worry of damage to the wheels. They were very easy to put together.

"Hard to put together, but worth it.", Working great for my bikes, came in the mail very quickly. Difficult to put together, one has to use a bit of "English" to get the parts to line up properly, but with two of us, we were able to put them together in about 20 minutes each.

"A decent bike stand", Pros: Compact and doesn't require wall installation. Easy to assemble. Does the job of holding bikes upright, outdoors in our very windy area.

Con: The stand is very lightweight and will stick to fat tires, which could add a couple of seconds to the removal of a mountain bike. To avoid this, I step on the base of the stand with one foot then pull the bike out. You might consider drilling the stand to the floor or filling its hollow base with sand or rocks.



 
Search for :
in